• Pressure-Compensating Module - Barb Inlet, 7.0 GPH, Violet
• Most compact and unobtrusive emitters
• Pressure-compensating design delivers uniform flow throughout a wide pressure range (10 to 50 psi; 0.7 to 3.5 bar)
• Self-piercing barbs for quick one-step emitter insertion into 1/2 in. or 3/4 in. drip tubing
• Robust design; durable plastic construction is UV-resistant and color-coded to identify flow rate

Pressure Compensating Emitter Performance Chart

*Note: Must use a PC Diffuser Cap (X50001 or X50002-reclaimed) attached to the top of the PC Module to avoid squirting water when using a PC Module as the final point of emission in an installation (for example; when connected directly to tubing, at the end of ¼” Distribution Tubing or on a PolyFlex Riser (PFR/FRA)).

• Pressure-Compensating Module - 10/32 Thread Inlet, 7.0 GPH, Violet
• Most compact and unobtrusive emitters
• Pressure-compensating design delivers uniform flow throughout a wide pressure range (10 to 50 psi; 0.7 to 3.5 bar)
• 10-32 threaded inlet that easily threads into a PolyFlex Riser, 10-32 Thread adapter or 1800 Xeri-Bubbler Adapter
• Robust design; durable plastic construction is UV-resistant and color-coded to identify flow rate

Pressure Compensating Emitter Performance Chart

*Note: Must use a PC Diffuser Cap (X50001 or X50002-reclaimed) attached to the top of the PC Module to avoid squirting water when using a PC Module as the final point of emission in an installation (for example; when connected directly to tubing, at the end of ¼” Distribution Tubing or on a PolyFlex Riser (PFR/FRA)).

• Pressure-Compensating Module - Barb Inlet, 10.0 GPH, Green
• Most compact and unobtrusive emitters
• Pressure-compensating design delivers uniform flow throughout a wide pressure range (10 to 50 psi; 0.7 to 3.5 bar)
• Self-piercing barbs for quick one-step emitter insertion into 1/2 in. or 3/4 in. drip tubing
• Robust design; durable plastic construction is UV-resistant and color-coded to identify flow rate

*Note: Must use a PC Diffuser Cap (X50001 or X50002-reclaimed) attached to the top of the PC Module to avoid squirting water when using a PC Module as the final point of emission in an installation (for example; when connected directly to tubing, at the end of ¼” Distribution Tubing or on a PolyFlex Riser (PFR/FRA)).

• Pressure-Compensating Module - 10/32 Thread Inlet, 10.0 GPH, Green
• Most compact and unobtrusive emitters
• Pressure-compensating design delivers uniform flow throughout a wide pressure range (10 to 50 psi; 0.7 to 3.5 bar)
• 10-32 threaded inlet that easily threads into a PolyFlex Riser, 10-32 Thread adapter or 1800 Xeri-Bubbler Adapter
• Robust design; durable plastic construction is UV-resistant and color-coded to identify flow rate

Pressure Compensating Emitter Performance Chart

*Note: Must use a PC Diffuser Cap (X50001 or X50002-reclaimed) attached to the top of the PC Module to avoid squirting water when using a PC Module as the final point of emission in an installation (for example; when connected directly to tubing, at the end of ¼” Distribution Tubing or on a PolyFlex Riser (PFR/FRA)).

• Pressure-Compensating Module - Barb Inlet, 12.0 GPH Dark Brown
• Most compact and unobtrusive emitters
• Pressure-compensating design delivers uniform flow throughout a wide pressure range (10 to 50 psi; 0.7 to 3.5 bar)
• Self-piercing barbs for quick one-step emitter insertion into 1/2 in. or 3/4 in. drip tubing
• Robust design; durable plastic construction is UV-resistant and color-coded to identify flow rate

Pressure Compensating Emitter Performance Chart

*Note: Must use a PC Diffuser Cap (X50001 or X50002-reclaimed) attached to the top of the PC Module to avoid squirting water when using a PC Module as the final point of emission in an installation (for example; when connected directly to tubing, at the end of ¼” Distribution Tubing or on a PolyFlex Riser (PFR/FRA)).

• Pressure-Compensating Module - Barb Inlet, 18.0 GPH, White
• Most compact and unobtrusive emitters
• Pressure-compensating design delivers uniform flow throughout a wide pressure range (10 to 50 psi; 0.7 to 3.5 bar)
• Self-piercing barbs for quick one-step emitter insertion into 1/2 in. or 3/4 in. drip tubing
• Robust design; durable plastic construction is UV-resistant and color-coded to identify flow rate

Pressure Compensating Emitter Performance Chart

*Note: Must use a PC Diffuser Cap (X50001 or X50002-reclaimed) attached to the top of the PC Module to avoid squirting water when using a PC Module as the final point of emission in an installation (for example; when connected directly to tubing, at the end of ¼” Distribution Tubing or on a PolyFlex Riser (PFR/FRA)).

• Pressure-Compensating Module - Barb Inlet, 24.0 GPH, Orange
• Most compact and unobtrusive emitters
• Pressure-compensating design delivers uniform flow throughout a wide pressure range (10 to 50 psi; 0.7 to 3.5 bar)
• Self-piercing barbs for quick one-step emitter insertion into 1/2 in. or 3/4 in. drip tubing
• Robust design; durable plastic construction is UV-resistant and color-coded to identify flow rate

Pressure Compensating Emitter Performance Chart

*Note: Must use a PC Diffuser Cap (X50001 or X50002-reclaimed) attached to the top of the PC Module to avoid squirting water when using a PC Module as the final point of emission in an installation (for example; when connected directly to tubing, at the end of ¼” Distribution Tubing or on a PolyFlex Riser (PFR/FRA)).

• Cap snaps securely onto PC Module to create bubbler effect and prevent wash out
• Designed for quick and easy installation
• Made of UV-resistant polyethylene material
• These caps prevent wash out from high flow emitters, delivering water to a targeted area for total control
• They create a bubbler effect with a 0-26 maximum throw and are designed for "finger-friendly" quick installation

• 5.0 GPH Pressure Compensating Threaded Low-Flow Bubbler
• Point-Source Medium-Flow Emitters for Watering Larger Shrubs and Trees
• Use as a bubbler on 1/2 in. PVC riser
• 1/2 in. FPT threads screw onto a variety of risers, spray heads, and fittings, delivering point-source, pressure compensating flow
• Uniform flow throughout a wide pressure range (15 to 50 psi; 1.03 to 3.45 bar)
• Robust design - durable plastic construction is UV-resistant and color coded caps identify flow rate

Pressure Compensating Emitter Performance Chart

• 7.0 GPH Pressure Compensating Threaded Low-Flow Bubbler
• Point-Source Medium-Flow Emitters for Watering Larger Shrubs and Trees
• Use as a bubbler on 1/2 in. PVC riser
• 1/2 in. FPT threads screw onto a variety of risers, spray heads, and fittings, delivering point-source, pressure compensating flow
• Uniform flow throughout a wide pressure range (15 to 50 psi; 1.03 to 3.45 bar)
• Robust design - durable plastic construction is UV-resistant and color coded caps identify flow rate

Pressure Compensating Emitter Performance Chart