PC18 - Pressure-Compensating Module - Barb Inlet, 18.0 GPH, White

Special Price $1.18 List Price $1.28

In stock

SKU

X71018

Pressure-Compensating Module - Barb Inlet, 18.0 GPH, White
Most compact and unobtrusive emitters
Pressure-compensating design delivers uniform flow throughout a wide pressure range (10 to 50 psi; 0.7 to 3.5 bar)
Self-piercing barbs for quick one-step emitter insertion into 1/2 in. or 3/4 in. drip tubing
Robust design; durable plastic construction is UV-resistant and color-coded to identify flow rate

*Note: Must use a PC Diffuser Cap (X50001 or X50002-reclaimed) attached to the top of the PC Module to avoid squirting water when using a PC Module as the final point of emission in an installation (for example; when connected directly to tubing, at the end of ¼” Distribution Tubing or on a PolyFlex Riser (PFR/FRA)).

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Details

Point-source medium-flow emitters for watering larger shrubs and trees. The only emitters with self-piercing barbs, making them the easiest to install using the Xeriman™ tool. Widest selection of pressure-compensating emitters, with 6 flow rates and 2 inlet options.

More Information

More Information
Emission Device Type	Single-outlet Emitter
Inlet Type	Barb
Flow Rate	18 gph
Operating Range	Pressure: 10 to 50 psi (0.7 to 3.5 bar) Required filtration: 100-mesh (150-micron) *Note: Must use a PC Diffuser Cap (X50001 or X50002-reclaimed) attached to the top of the PC Module to avoid squirting water when using a PC Module as the final point of emission in an installation (for example; when connected directly to tubing, at the end of ¼” Distribution Tubing or on a PolyFlex Riser (PFR/FRA)).