XFCV0912100 - XFCV 0.9GPH 12" Spacing 100 Foot Coil

$83.94
In stock
SKU
X47030MX

XFS-CV Dripline

With Copper Shield™ Technology and Heavy-Duty Check Valve

Rain Bird® XFS-CV Dripline with a heavy-duty 4.3 psi check valve for on-surface and sub-surface applications adds a valuable member to the Rain Bird XF Series of Dripline. The XFS-CV is the most effective dripline in the industry and is ideal for areas where no other dripline will work. When used in applications where elevation changes exist, the patent-pending check valve keeps the dripline charged, holding 10 feet of hold back - the highest holdback in the industry. Rain Bird's XFS-CV offers better uniformity and helps to prevent over-watering at the low-point in the zone, avoiding puddling and water draining from the dripline. With a pure copper chip inside every emitter, XFS-CV Dripline also offers the industry's most effective root intrusion protection.

It accepts Rain Bird Easy Fit Compression Fittings, XF Dripline Barbed Insert Fittings and other 17 mm barbed insert fittings.

Features

Simple
  • Rain Bird’s patent-pending 4.3 psi check valve technology keeps the dripline charged with water at all times, increasing uniformity of watering, and conserves water by eliminating the need to recharge the line at the beginning of each watering cycle
  • XFS-CV Sub-Surface Dripline emitters are protected from root intrusion by Rain Bird’s patent-pending Copper Shield™ Technology resulting in a system that does not require maintenance or replacement of chemicals to prevent root intrusion
  • Rain Bird’s low-profile emitter design reduces in-line pressure loss, allowing longer lateral runs, simplifying design and reducing installation time
  • Variety of standard emitter flow rates, emitter spacing and coil lengths provide design flexibility for sub-surface and on-surface areas with or without elevation changes
  • Through the use of a proprietary tubing material, the XFS-CV Dripline with heavy-duty check valve is the most flexible dripline tubing in the industry, making it the easiest dripline to design with and install
Made with Recycled Content
  • All Rain Bird XF Dripline (XFD, XFS, XFCV, XFS-CV) qualify for LEED credit 4.2 because they contain at least 20% Polyethylene post consumer recycled material by cost. These come in an assortment of coil sizes, flow rates and emitter spacing
Reliable
  • The pressure-compensating emitter design provides a consistent flow over the entire lateral length ensuring higher uniformity for increased reliability in the pressure range of 20 to 60 psi
Durable
  • Dual-layered tubing (copper over black) provides unmatched resistance to chemicals, algae growth and UV damage
Grit Tolerant
  • Rain Bird’s proprietary emitter design resists clogging by use of an extra wide flow path combined with a self-flushing action

XFS-CV Dripline for Every Jobsite

XFS-CV Dripline Tech Specs

Specifications

The flexible, copper-colored polyethylene tubing shall have factory-installed pressure[1]compensating, inline emitters spaced evenly per listed spacing. The flow rate from each installed inline emitter shall be 0.6 or 0.9 gph (2.3 or 3.5 l/h) when inlet pressure is between 20 and 60 psi (1.38 to 4.14 bar).

The inline emitter shall have Copper Shield Technology with a pure copper chip at each emitter to protect the emitter from root intrusion. The emitter shall be raised off the inside tube wall to minimize dirt intrusion. Each emitter shall have an automatic check valve that will seal the line at 4.3 psi (0.3 bar).

The inline emitter shall have a pressure[1]regulating diaphragm with a spring action allowing it to self-rinse if there is a plug at the outlet hole. The flexible tubing allows for easy non-linear installations. The XFS-CV dripline shall be manufactured by Rain Bird Corporation.

Applications

Rain Bird® XFS-CV dripline features Copper Shield Technology and a heavy-duty 4.3 psi (0.3 bar) check valve, making it perfect for sub-surface and on-surface applications with level grades or slopes. A check valve in every emitter keeps the dripline charged in elevation changes up to 10 feet (3 m), XFS-CV can be used where no other dripline will work. Keeping water in the dripline results in better irrigation uniformity throughout the zone. The check valve also helps prevent puddling and oversaturated soil at the low point in the zone.

More Information

More Information
Model XFCV0912100
Operating Range
Opening Pressure: 14.5 psi
Pressure: 20 to 60 psi (1.38 to 4.14 bar)
Flow rates: 0.4, 0.6 and 0.9 gph (1.6, 2.3 and 3.5 l/hr)
Temperature:
-Water: Up to 100°F (37.8° C)
-Ambient: Up to 125°F (51.7° C)
Required Filtration: 120 mesh
Dimensions
OD: 0.634" (16mm)
ID: 0.536" (13.6mm);
Thickness: 0.049" (1.2mm)
Frequently Bought Together
Total price
© 2024 Rain Bird Corporation. All Rights Reserved.