100DVSS - 1 in. DV Series Inline Plastic Residential Irrigation Valve - Slip x Slip
- 1 in. (26/34) Slip-by-Slip (SS) configuration for low cost, solvent-weld installations
- Double-filtered pilot-flow design for maximum reliability
- Balanced-pressure diaphragm for long life
- External bleed to manually flush system of dirt and debris during installation and system start-up
- Internal bleed for spray-free manual operation
- Energy-efficient, low-power encapsulated solenoid with captured plunger and 90-mesh (200 micron) solenoid filter
Rain Bird manufactures only the highest quality valves. Use DV/DVF series valves in locations where the use of a separate pressure vacuum breaker (PVB) or a double-check valve is required by city codes to protect against back flow. Check your local city codes to determine what type of valves are required.
- All of our valves work with any standard sprinkler timer.
- Buna-N diaphragm with self-cleaning 90 mesh (200 micron) pilot water filter and captive spring.
- Operates in low-flow and Xerigation® applications when the RBY filter is installed upstream.
- 1.25 in. (3,2 cm) stainless steel phillips head screws.
- Accepts latching solenoid for use with Rain Bird battery-operated controllers.
|Valve Size||1 in|
|Valve Inlet/Outlet Configuration||Slip x Slip|
|Operating Temperature||Up to 110° F (43° C)|
Height: 4 1/2" (11,4 cm)
24 VAC 50/60 Hz (cycles per second) solenoid power requirement:
|Flow Range||0.2 to 40 GPM (0,05 to 9,08 m3/h; 0,01 to 2,52 l/s). For flows below 3 GPM (0,75 m3/h; 0,21 l/s) or any Xerigation® application, use a 200 mesh filter installed upstream.|
|Operating Pressure||15 to 150 psi (1,0 to 10,4 bar)|