Rain Bird 752E 80 PSI Series Full/Part Circle Golf Rotor, ACME, 36 Yellow Nozzle

$640.84
Out of stock
SKU
GRC162836

 Continuous Innovation for the Future

With unmatched flexibility, industry-leading uniformity and a consistent rotation speed, the full/part-circle 752 Series make it easier to maintain flawless turf. Turn-of-a-screw adjustments and top serviceability save you time and labor costs season after season.

75% Faster Nozzle Changes
With a screwdriver, you can quickly change nozzles in the field without removing internals.

One Stator for Any Nozzle
When changing nozzles,the self-adjusting stator automatically modifies flow to control rotation speed and optimize performance.

Easy Arc Adjustments
Rapid-Adjust Technology allows you to handle arc adjustments with the turn of a screw, while MemoryArc® lets you shift between full- and part-circle operation in seconds.

The sprinkler shall be supplied with an Integrated Control Module “ICM” providing valve-in-head single-station control.  ICMs shall include solid-state electronic circuitry and epoxy potted in a sturdy plastic case suitable for direct burial. Each ICM shall be located directly on the solenoid mounting threads on the side of the sprinkler case. Each ICM module shall be factory preset with an address and bar code permanently and prominently marked on the ICM case. A removable bar code label shall be attached to the permanent label to facilitate easy recording of ICM addresses. The ICM unit shall have individual wire leads of 24” (77 cm).

ICM units shall be capable real time two-way communication with the ICI and central computer on a sub-second communication basis. Data transfer between the ICM and Rain Bird central control system shall include critical operational status, system diagnostics and voltage information at each unit. Each ICM shall incorporate internal multi-stage surge protection on each wire leg including varistors, diodes and inductor trace management. When used with proper grounding and ICSD surge devices the IC System shall be rated for 20,000 Volts and 10,000 Amps.

The sprinkler shall have a built-in pressure regulator that will be factory-preset to 70 or 80 psi (4.8 or 5.5 bars) as specified. The pressure setting, as set in the factory, will be identified by color-coding on the top of the regulator. The pressure regulator shall be manufactured so it may be adjusted from the top of the case using a small flat-blade screwdriver to facilitate easy adjustment and precision operation to accommodate field applications. The top-serviceable selector will allow the sprinkler to be operated in three different operational modes: Manual “ON” mode utilizing an electrical bypass, Automatic “AUTO” mode for operation with an electrical input or “OFF” mode which manually shuts off the valve actuator entirely. The selector shall be adjustable from AUTO to OFF without activating the sprinkler.

The sprinkler case shall have a top diameter of 6.25" (15.8 cm) and an overall height of 12.0” (30.5 cm).  The case shall be designed to operate at a maximum inlet pressure of 150 psi (10.3 bars) and capable of burst pressures up to 500psi (34.4 bars). The case shall have a double-wall construction female 1.25” (3.2 cm) ACME bottom inlet.

A removable and replaceable integrated Top Serviceable Rock Screen and Valve Seat shall be serviceable through the top of the rotor. When in operation the pilot valve will vent all discharge water back to the case through a pilot tube, preventing external water from accumulating around the rotor or pilot valve assembly. A rolling-diaphragm bottom valve shall be supplied to ensure long valve life with high reliability. The valve shall be retained with dual snap rings for enhanced safety and have a rubber seat and universal pilot filter assembly that shall be fully replaceable.

More Information
Coverage Arc Full Circle 360° and Adjustable Part Circle 30° to 345°
Inlet Threads 1.25 in ACME Female Threaded
Body/Valve E - Electric
Pressure Regulator 80 psi
Coverage Radius 56 ft to 79 ft
Pressure Range
  • Maximum Inlet Pressure: 150 psi (10.3 bars)
  • Pressure Regulation Range: 60 to 100 psi (4.1 to 6.9 bars)
Dimensions
  • Body Height: 12.0” (30.5cm)
  • Pop-Up Height to Mid-Nozzle: 2.6” (6.6 cm)
  • Top Diameter: 6.25” (15.9cm)
Specifications
  • Flow Rate: 6.7 to 47 gpm (0.42 to 2.97 l/s); (1.51 to 10.68 m3/h)
  • Nozzle Trajectory:
    • Standard: 25° (#18Nozzle: 15°)
    • Wind Tolerant: 12°
    • Low Angle: 15°
  • Rotation Time: 180° in ≤ 90 seconds; 80 seconds nominally
  • Maximum Stream Height:
    • Standard: 17’ (5.2m)
    • Wind Tolerant: 10’ (3.1m)
    • Low Angle: 12’ (3.7m)
  • Solenoid:
    • 24 VAC solenoid power requirement: 0.41 amp inrush current (9.8 VA); 60 Hz: 0.25 amp holding current (6.0 VA); 50 Hz: 0.32 amp holding current (7.7 VA)
  • Surge Resistance: 25kV standard on electric models
  • Special Features:
    • Self-Adjusting Stator
    • Optional Sod Cup
70X/75X Nozzle 36 Yellow Nozzle
Frequently Bought Together
© 2021 Rain Bird Corporation. All Rights Reserved.