Nozzle #52 Orange, 11000 Series (Must order in multiples of 10 units)

Replacing the Nozzle

• IMPORTANT NOTE: Make sure the sprinkler does not operate automatically while you are changing the nozzle. Turn off the water.
• NOTE: Make sure the snap ring is securely in place before removing the nozzle housing screws.
• Clean top of case assembly to prevent debris from falling in when nozzle housing is removed.
• Required Tools: Phillips-head screwdriver; Flat-head screwdriver.

Image 1 - Use a Phillips-head screwdriver to loosen the nozzle housing screws

Image 2 - Grasp the nozzle housing screws and lift up to separate the nozzle housing from the internal

Image 3 - Press the replacement nozzle assembly into the nozzle housing, making sure the nozzle front is flush with the outside of the housing

Image 4 - An O-ring seal is required on all nozzles.

CAUTION: If the nozzle is not flush and seated properly in the nozzle housing, the rotor may not perform properly.

11000 Nozzles Performance Chart