Drippers, Emitters & MicroSprays

• 5-Year Trade Warranty
• Reversible, dual-pattern deflector can be flipped to adjust wetted area dependent on crop maturation.
• Snap-fit nozzles and deflectors for convenient assembly, disassembly, and cleaning without tools.
• Large, color-coded parts make installation and maintenance easy.
• Ultraviolet (UV) stabilized resin resists damage from sun and chemicals.
• Large stakes provide optimal stability and height.
• Order pre-assembled from the factory or as individual components for field customization.

Micro Bird® Jet - Technical Specifications

• Half Circle or Full Circle Micro Bubbler - Bag of 4
• Ideal for shrub plantings, trees, containers and flower beds
• Adjust flow and radius by turning outer cap
• Includes a stake and 1/4 in. fitting for easy connection

• Half Circle or Full Circle Pattern Threaded Microsprays
• Up to 10 ft. watering distance
• 2 pack
• Ideal for mass plantings, ground cover, annual flower beds and containers
• 0 - 29 GPH adjustable flow
• Low watering rate helps you save water
• Constructed of highly durable UV and chemical-resistant materials to assure long life
• Black color
• Total Satisfaction Policy

• Rain Bird MISTUB-1S Drip Irrigation Flexible Mister, 360° Full Circle Pattern, 12" Length, up to 1.3' Spray Distance.
• Ideal for potted or hanging plants this unique mister delivers a gentle mist of water perfect for fragile plants, ferns and more.
• With its full 360° spray pattern and adjustable flow rate it can be used with small to large containers.
• The semi-rigid flexible tubing allows you to configure the mister into the exact position needed and secure in place by twisting or bending.
• Barbed end inserts easily into 1/4" Drip irrigation tubing.
• Twist cap to adjust spray distance from 0 to 1.3' and flow rate from 0 to 6 gallons per hour.
• Constructed of highly durable UV and chemical-resistant materials to assure long life. Rain Bird “The Intelligent Use of Water”

• Cap snaps securely onto PC Module to create bubbler effect and prevent wash out
• Designed for quick and easy installation
• Made of UV-resistant polyethylene material
• These caps create a bubbler effect and prevent wash out from high flow emitters, delivering water to a targeted area for total control
• Designed for "finger-friendly" quick installation

• Pressure-Compensating Module - Barb Inlet, 5.0 GPH, Light Brown
• Most compact and unobtrusive emitters
• Pressure-compensating design delivers uniform flow throughout a wide pressure range (10 to 50 psi; 0.7 to 3.5 bar)
• Self-piercing barbs for quick one-step emitter insertion into 1/2 in. or 3/4 in. drip tubing
• Robust design; durable plastic construction is UV-resistant and color-coded to identify flow rate

Pressure Compensating Emitter Performance Chart

*Note: Must use a PC Diffuser Cap (X50001 or X50002-reclaimed) attached to the top of the PC Module to avoid squirting water when using a PC Module as the final point of emission in an installation (for example; when connected directly to tubing, at the end of ¼” Distribution Tubing or on a PolyFlex Riser (PFR/FRA)).

• Pressure-Compensating Module - 10/32 Thread Inlet, 5.0 GPH, Light Brown
• Most compact and unobtrusive emitters
• Pressure-compensating design delivers uniform flow throughout a wide pressure range (10 to 50 psi; 0.7 to 3.5 bar)
• 10-32 threaded inlet that easily threads into a PolyFlex Riser, 10-32 Thread adapter or 1800 Xeri-Bubbler Adapter
• Robust design; durable plastic construction is UV-resistant and color-coded to identify flow rate

Pressure Compensating Emitter Performance Chart

*Note: Must use a PC Diffuser Cap (X50001 or X50002-reclaimed) attached to the top of the PC Module to avoid squirting water when using a PC Module as the final point of emission in an installation (for example; when connected directly to tubing, at the end of ¼” Distribution Tubing or on a PolyFlex Riser (PFR/FRA)).

• Pressure-Compensating Module - Barb Inlet, 7.0 GPH, Violet
• Most compact and unobtrusive emitters
• Pressure-compensating design delivers uniform flow throughout a wide pressure range (10 to 50 psi; 0.7 to 3.5 bar)
• Self-piercing barbs for quick one-step emitter insertion into 1/2 in. or 3/4 in. drip tubing
• Robust design; durable plastic construction is UV-resistant and color-coded to identify flow rate

Pressure Compensating Emitter Performance Chart

*Note: Must use a PC Diffuser Cap (X50001 or X50002-reclaimed) attached to the top of the PC Module to avoid squirting water when using a PC Module as the final point of emission in an installation (for example; when connected directly to tubing, at the end of ¼” Distribution Tubing or on a PolyFlex Riser (PFR/FRA)).

• Pressure-Compensating Module - 10/32 Thread Inlet, 7.0 GPH, Violet
• Most compact and unobtrusive emitters
• Pressure-compensating design delivers uniform flow throughout a wide pressure range (10 to 50 psi; 0.7 to 3.5 bar)
• 10-32 threaded inlet that easily threads into a PolyFlex Riser, 10-32 Thread adapter or 1800 Xeri-Bubbler Adapter
• Robust design; durable plastic construction is UV-resistant and color-coded to identify flow rate

Pressure Compensating Emitter Performance Chart

*Note: Must use a PC Diffuser Cap (X50001 or X50002-reclaimed) attached to the top of the PC Module to avoid squirting water when using a PC Module as the final point of emission in an installation (for example; when connected directly to tubing, at the end of ¼” Distribution Tubing or on a PolyFlex Riser (PFR/FRA)).

• Pressure-Compensating Module - Barb Inlet, 10.0 GPH, Green
• Most compact and unobtrusive emitters
• Pressure-compensating design delivers uniform flow throughout a wide pressure range (10 to 50 psi; 0.7 to 3.5 bar)
• Self-piercing barbs for quick one-step emitter insertion into 1/2 in. or 3/4 in. drip tubing
• Robust design; durable plastic construction is UV-resistant and color-coded to identify flow rate

*Note: Must use a PC Diffuser Cap (X50001 or X50002-reclaimed) attached to the top of the PC Module to avoid squirting water when using a PC Module as the final point of emission in an installation (for example; when connected directly to tubing, at the end of ¼” Distribution Tubing or on a PolyFlex Riser (PFR/FRA)).