• 1/2 in. Drip End Closure - 2 Pack
• This end closure allows for easy flushing and draining of 1/2" tubing
• Easy to install
• UV-resistant

• 1/2 in. Easy Fit Spike Tee
• Faster and easier to install—requires up to 50% less force to install tubing, making your installation project faster and easier
• Great for maintenance and retrofitting existing systems
• Works with virtually any manufacturer's 1/2 in. tubing, where the outside diameter ranges from .630" to .669" (16mm to 17mm)
• The eight components of the Easy Fit System (3 Fittings and 5 Adapters) can be built into over 160 different configurations
• Not compatible with Rain Bird XBS or XT700 tubing
• Easy Fit Adapters are not barbed fittings; they are to be used only with Easy Fit Compression Fittings

• Easy Fit 3/4 in. FPT to 1/2 in. Drip Adapter
• Easy Fit Compression Fitting System - Elbow
• Faster and easier to install—requires up to 50% less force to install tubing, making your installation project faster and easier
• Great for maintenance and retrofitting existing systems
• Works with virtually any manufacturer's 1/2 in. tubing, where the outside diameter ranges from .630" to .669" (16mm to 17mm)
• Not compatible with Rain Bird XBS or XT700 tubing
• Easy Fit Adapters are not barbed fittings; they are to be used only with Easy Fit Compression Fittings

• Rain Bird EFTFHT-1S Drip Irrigation Easy Fit Tee Adapter, 3/4" Female Hose Thread x Easy Fit Universal Fitting, Fits All 1/2" and 5/8" Drip Tubing.
• This adapter connects 1/2" Drip tubing to either a 3/4" hose bib or garden hose in a "T" configuration allowing Drip tubing to run in two separate directions.
• The 3/4" female thread hand tightens to your water source while the two compression fittings quickly connect to 1/2" or 5/8” Drip tubing.
• Rain Bird's Easy Fit system involves simple push-together hand assembly and fits all brands of 1/2" and 5/8" Drip tubing.
• Quick, push-together assembly speeds installation.
• The finished connection is durable, leak-resistant and stays in place season after season.
• Constructed of highly durable UV and chemical-resistant materials to assure long life. Rain Bird "The Intelligent Use of Water"

• 1/2 in. (15/21) FPT inlet threads onto 1/2 in. riser and provides a manifold with six free-flowing 1/4 in. barb outlets
• Each barb outlet is sealed with a durable plastic cap
• Plastic caps remove easily, allowing for a drip area that can be customized with up to six different emission devices
• Attach 1/4 in. Drip Distribution Tubing (XQ) onto each outlet for use with Xeri- Bugs, PC Modules, Xeri-Pops, Xeri-Sprays, and Xeri-Bubbler

• The patented tool makes it easy to grip the small parts for insertion into the ends of 1/4" tubing or the sidewall of 1/2" tubing
• An additional slot in the tool also allows removing any existing fittings you may wish to replace or plug

• 1/4 in. Non-Pressure Compensating Emitter Tubing - 50 ft.
• Flexible 1/4 in. Emitter Tubing is ideal for extending watering to narrow planting areas and container plants
• Each emitter is spaced 12 in. apart and emits 1 GPH (gallons per hour) of water

• Rain Bird Drip Irrigation 1/2" (.634" OD) Emitter Tubing.
• 50 or 100 foot coil.
• Built-in pressure compensating emitters spaced every 18 in.
• Each emitter is 0.9 GPH (gallons per hour).
• Waters uniformly throughout the planting area, improving plant health and growth.
• Rugged and flexible, easy to unroll and stake in the garden, flower bed, ground cover or other landscaped areas.
• Works like soaker hose – only better.
• Unmatched resistance to chemicals and UV damage.
• Designed for above ground installation.

Landscape Drip Irrigation Guide

• 1/2 in. Pressure Compensating Emitter Tubing - 100 ft. Coil
• Emitter Tubing waters plants uniformly with pre-installed, pressure compensating emitters spaced every 18 in.
• The emitters are designed for clog-resistant flow at 0.9 GPH (gallons per hour) to ensure even, reliable watering

• Rain Bird Drip Irrigation 1/2" (.634" OD) Emitter Tubing.
• 50 foot coil.
• Built-in pressure compensating emitters spaced every 18 in.
• Each emitter is 0.9 GPH (gallons per hour).
• Waters uniformly throughout the planting area, improving plant health and growth.
• Rugged and flexible, easy to unroll and stake in the garden, flower bed, ground cover or other landscaped areas.
• Works like soaker hose – only better.
• Unmatched resistance to chemicals and UV damage.
• Designed for above ground installation.
• Brown color.

Landscape Drip Irrigation Guide