CP-100 - 1 in. In-Line Irrigation Valve FTP

Special Price $19.99 List Price $30.87
In stock
SKU
B60111
  • Buna-N diaphragm offers superior performance in harsh water environments
  • Reliable, non-clogging design
  • Reverse Flow design reduces stress on diaphragm for dependable operation
  • In-line design minimizes pressure loss of dirt and debris during installation and system start-up
  • Operates automatically or manually with manual bleed screw Works with any standard sprinkler timer
  • Designed for below-ground installation, out of sight and away from playful hands
  • Energy efficient, low power encapsulated solenoid with captured plunger for long lasting dependability
  • 1 inch female threaded inlet and outlet (use 1 inch MPT threaded pipe adapters with Teflon tape)
  • Heavy duty construction

Troubleshooting and Maintenance Guide

  • Material: Plastic
  • Valve Size: 1 in
  • Valve Type: Inline

This residential and light commercial grade in-line valve replaces Rain Bird and other irrigation valves installed below ground with 1 in. female threaded inlet and outlet. It can be used with any 24 volt AC irrigation timer. Its unique reverse-flow design helps prevent flooding in the event of internal diaphragm failure, keeping the valve closed and saving water.

This valve can be applied with all types of watering devices including Rain Bird spray heads (1800, 600), and rotors (22SA, 32SA, 42SA+, 52SA, LG3 and AG5).

Use in-line valves in locations where the use of a pressure vacuum breaker (PVB) or a double-check valve is required by code to protect against backflow. Check your local codes to determine what type of valve is required. After installation and before startup, always the flush system of dirt and debris manually using the valve's external bleed screw.

 


Warranty

If a purchaser of any new Rain Bird consumer product becomes dissatisfied with it for any reason, he may return it to the retailer where it was purchased within a reasonable time for a full refund. Rain Bird’s obligation is limited to this refund for any product that does not meet a purchaser’s expectations. Other than its satisfaction policy, there are no warranties on Rain Bird consumer products, express or implied, nor will Rain Bird be responsible for any economic or consequential damages.

More Information
Model CP100
Valve Size 1 in
Valve Type Inline
Material Plastic
Valve Inlet/Outlet Configuration NPT Female x NPT Female Threaded
Operating Temperature

Minimum Water and Ambient Air Temperature: 40° F (4° C)

Water temperature: up to 110° F (43° C)

Ambient temperature: up to 125° F (52° C)

Dimensions

Width: 4.75 in

Height: 5 in

Depth: 3.37 in

Electrical Specifications

24 VAC 50/60 Hz solenoid

Inrush: .30 amp

Holding: .19 amp

Flow Range

0.2 to 40 gpm

For flows below 3 GPM or drip line applications install a 200 mesh filter before the valve

Operating Pressure 15 to 150 psi
Frequently Bought Together
Total price
© 2021 Rain Bird Corporation. All Rights Reserved.