CP-100 - 1 in. FPT In-line Automatic Sprinkler Valve

$22.49
In stock
SKU
B60111

This residential and light commercial grade in-line valve replaces Rain Bird and other irrigation valves installed below ground with 1 in. female threaded inlet and outlet. It can be used with any 24 volt AC irrigation timer.

Its unique reverse-flow design helps prevent flooding in the event of internal diaphragm failure, keeping the valve closed and saving water. This valve can be applied with all types of watering devices including Rain Bird spray heads (1800, 600) and rotors (22SA, 32SA, 42SA+, 52SA, LG3 and AG5).

Use in-line valves in locations where the use of a pressure vacuum breaker (PVB) or a double-check valve is required by code to protect against backflow. Check your local codes to determine what type of valve is required. After installation and before startup, always the flush system of dirt and debris manually using the valve's external bleed screw.

CP/CPF Series Valve Installation and Operation (ENG)

Instalacion y Funcionamiento de la Valvula CP/CPF (SPA)

Installation et Utillisation de la vanne serie CP/CPF (FRA)

  • Material: Plastic
  • Valve Size: 1 in
  • Valve Type: Inline
  • Reliable, non-clogging design
  • Reverse Flow design reduces stress on diaphragm for dependable operation
  • In-line design minimizes pressure loss of dirt and debris during installation and system start-up
  • Operates automatically or manually with manual bleed screw Works with any standard sprinkler timer
  • Designed for below-ground installation, out of sight and away from playful hands
  • Energy efficient, low power encapsulated solenoid with captured plunger for long lasting dependability
  • Heavy duty construction

Features:

  • In-line valve; compatible with any standard sprinkler controller
  • Designed for below-ground installation, out of sight and away from playful hands
  • Replaces all major in-line valve brands
  • Reverse flow design reduces stress on diaphragm for dependable operation
  • Buna-N diaphragm offers superior performance in harsh water environments
  • External bleed to manually flush the system of dirt and debris during installation and system start-up
  • Energy efficient, low power encapsulated solenoid with a captured plunger for long dependability

Check your local codes to determine what type of valve is required


CP Series Valve Installation and Operation

 

Before Installation

  • Install master valves, pressure regulators and backflow preventers as needed.
  • A pressure regulator is required if water pressure exceeds 150 PSI (recommended over 80 PSI).
  • In-line valves require a separate backflow preventer in the main line. Check local building codes.
  • Flush the system thoroughly until water runs clear.
  • Shut off the main water supply.

NOTE: For less than 3 GPM flow or drip applications install a 200 mesh filter before the valve.

Connect Valve to Pipes

  1. Apply PTFE thread-seal tape to the male threads on the adapters, screw into the valve and hand-tighten. (do not use PVC glue or pipe dope on adapter threads).
  2. Apply primer and then PVC cement to the ends of the pipe and inside the adapters per manufacturer’s instructions.
  3. Ensure the valve arrows face in the direction of water flow, and push valve onto inlet and outlet pipes until secure. Follow PVC cement instructions for cure time.

Connect Valve Wires

NOTE: Use watertight connectors and direct burial wire for all connections.

  1. Connect one solenoid wire to a common wire (usually white). All valves can share the same common wire.
  2. Connect the second solenoid wire to a power wire (usually colored).

Valve Operation

Manual Operation:

  1. Manual on: Turn the solenoid counter-clockwise 1/4 turn. Do not unscrew completely. To close, hand tighten clockwise.
  2. Flow control (select models only): Turn clockwise to restrict flow. Turn counter-clockwise to open flow.
  3. Flush valve to clear debris: Turn the bleed screw counter-clockwise ONLY 1 turn. Flush one minute and turn clockwise to close.

 
DASASVF075
DASASVF100
CPF075
CPF100
CP075
CP100
SPECS            
Inlet Size 3/4 in. female threaded 1 in. female threaded 3/4 in. female threaded 1 in. female threaded 3/4 in. female threaded 1 in. female threaded
Outlet Size 3/4 in. female threaded 1 in. female threaded 3/4 in. female threaded 1 in. female threaded 3/4 in. female threaded 1 in. female threaded
Install Location Above-ground; for outdoor use only Above-ground; for outdoor use only Below-ground; for outdoor use only Below-ground; for outdoor use only Below-ground; for outdoor use only Below-ground; for outdoor use only
Built-in Backflow Prevention --- --- --- ---
Flow Control --- ---
Flow Range 0.2 GPM to 22 GPM 0.2 GPM to 40 GPM 0.2 GPM to 22 GPM 0.2 GPM to 40 GPM 0.2 GPM to 22 GPM 0.2 GPM to 40 GPM
Pressure Range 15-150 PSI 15-150 PSI 15-150 PSI 15-150 PSI 15-150 PSI 15-150 PSI
Voltage 24V∿ 50/60 Hz 24V∿ 50/60 Hz 24V∿ 50/60 Hz 24V∿ 50/60 Hz 24V∿ 50/60 Hz 24V∿ 50/60 Hz
Water Temperature <110° F <110° F <110° F <110° F <110° F <110° F

Limited Warranty

If the original purchaser of a new Rain Bird consumer product purchased directly from Rain Bird, an authorized retailer, or an authorized reseller is not satisfied for any reason, the purchaser may return the product to the seller within a reasonable time after purchase for a full refund of the purchase price. Rain Bird’s sole obligation under this warranty is limited to providing a refund as described above. This warranty is extended only to the original end-user purchaser or the original recipient of the product as a gift. It does not extend to any subsequent owner or transferee. Except as expressly provided above, all implied warranties, including implied warranties of merchantability and fitness for a particular purpose, are limited in duration to the duration of this warranty, to the extent permitted by law.

Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

More Information
Model CP100
Flow Control: No
Size: 1 Inch
Valve Size 1 in
Valve Type Inline
Material Plastic
Valve Inlet/Outlet Configuration NPT Female x NPT Female Threaded
Operating Temperature

Minimum Water and Ambient Air Temperature: 40° F (4° C)

Water temperature: up to 110° F (43° C)

Ambient temperature: up to 125° F (52° C)

Dimensions

Width: 4.75 in

Height: 5 in

Depth: 3.37 in

Electrical Specifications

24 VAC 50/60 Hz solenoid

Inrush: .30 amp

Holding: .19 amp

Flow Range

0.2 to 40 gpm

For flows below 3 GPM or drip line applications install a 200 mesh filter before the valve

Operating Pressure 15 to 150 psi
Frequently Bought Together
Total price

Product Type Conflict

You cannot add this product because you are trying to add GSP and other product type together. Please choose one of the following options:

© 2026 Rain Bird Corporation. All Rights Reserved.