CPF075 – 3/4 in. FPT Inline Sprinkler Valve with Flow Control

Special Price $21.99 List Price $41.21
In stock
SKU
B61187
  • Easy To Install With 3/4 In. Male Threaded Pipe adapters
  • Directional Flow Arrows Ensure Proper Valve Installation.
  • Reverse Flow Design To Allow The Valve To Fail Closed To Save Water.
  • Flow Control Mechanism Is Used To Reduce The Flow Of Water To Stop
  • Wasteful Fogging And Misting At The Sprinkler Nozzles And For Manual Shut-Off.
  • Use The Manual External Bleed Screw To Flush Dirt And Debris.
  • Can Operate Electrically With Any 24 Volt Timer Or Manaully By Turning
  • The Solenoid 1/4 Turn Counter-Clockwise.
  • Proven Reliability with Heavy Duty Construction For Long Lasting Operation.
  • Used in Residential and Light Commercial Applications.

Maintenance Guide for Rain Bird Valves

CP/CPF Valve Instructions (English)

CP/CPF Valve Instructions (Español)

CP/CPF Valve Instructions (French)

 

  • Material: Plastic
  • Valve Size: 3/4 in
  • Valve Type: Inline

This residential and light commercial grade in-line valve replaces Rain Bird and other irrigation valves installed below ground with 3/4 in. female threaded inlet and outlet. It can be used with any 24 volt AC irrigation timer. Its unique reverse-flow design helps prevent flooding in the event of internal diaphragm failure, keeping the valve closed and saving water. Equipped with the additional advantage of adjustable flow control, this model helps prevent wasteful misting when water pressure is too high. A top mounted, easy turn flow control knob allows you to optimize flow to the zone, permitting sprinklers to water at their most efficient rate for more uniform coverage. This valve can be applied with all types of watering devices including Rain Bird spray heads (1800, 600), and rotors (22SA, 32SA, 42SA+, 52SA, LG3 and AG5) as well as Drip zones when properly installed together with a pressure regulator and filter. Use in-line valves in locations where the use of a pressure vacuum breaker (PVB) or a double-check valve is required by code to protect against backflow. Check your local codes to determine what type of valve is required. After installation and before startup, always the flush system of dirt and debris manually using the valve's external bleed screw.

Warranty

If a purchaser of any new Rain Bird consumer product becomes dissatisfied with it for any reason, he may return it to the retailer where it was purchased within a reasonable time for a full refund. Rain Bird’s obligation is limited to this refund for any product that does not meet a purchaser’s expectations. Other than its satisfaction policy, there are no warranties on Rain Bird consumer products, express or implied, nor will Rain Bird be responsible for any economic or consequential damages.

More Information
Model CPF075
Valve Size 3/4 in
Valve Type Inline
Material Plastic
Valve Inlet/Outlet Configuration NPT Female x NPT Female Threaded
Operating Temperature

Minimum Water and Ambient Air Temperature: 40° F (4° C)

Water temperature: up to 110° F (43° C)

Ambient temperature: up to 125° F (52° C)

Dimensions

Width: 4.75 in

Height: 5 in

Depth: 3.37 in

Electrical Specifications

24 VAC 50/60 Hz solenoid

Inrush: .30 amp

Holding: .19 amp

Flow Range

0.2 to 22 gpm

For flows below 3 GPM or drip line applications install a 200 mesh filter before the valve

Operating Pressure 15 to 150 psi
Frequently Bought Together
Total price
© 2021 Rain Bird Corporation. All Rights Reserved.