100PESB - 1 in. Inlet Inline Plastic Industrial Irrigation Valve

$228.25
In stock
SKU
B34213
  • 1 in. (26/34) plastic industrial irrigation valve
  • Durable glass-filled nylon construction with fabric-reinforced rubber diaphragm for long life and reliable performance
  • Globe configuration
  • Normally closed, forward flow design
  • Slow closing to prevent water hammer and subsequent system damage
  • Low flow capability for a wide range of applications
  • One-piece solenoid design with captured plunger and spring for easy servicing; prevents loss of parts during field service
  • Flow control handle adjusts water flows as needed
  • * Solenoid handle is not included *
  • Material: Plastic
  • Valve Options: Dirty Water
  • Valve Size: 1 in
  • Valve Type: Inline

The PESB Series is our most durable plastic irrigation valve. This industrial-strength glass-filled nylon globe valve is ideal for commercial irrigation applications. The PESB series incorporates patented scrubber technology for reliable performance in dirty water irrigation applications.

Additional Features:

  • Manual internal bleed manually operates the valve without allowing water into the valve box; allows pressure regulator to be adjusted without turning the valve on at the controller first.
  • Manual external bleed permits flushing debris from the system. Recommended for system start up and after repairs.
  • Stainless steel studs molded into the body. Bonnet can be attached and removed more easily and more often without damaging threads.
  • Nylon scrubber scrapes a stainless steel screen to clean and break down grit and plant material. Prevents debris build-up and clogging.
More Information
Model 100PESB
Valve Size 1 in
Valve Type Inline
Material Plastic
Valve Inlet/Outlet Configuration NPT Female x NPT Female Threaded
Valve Options Dirty Water
Valve Series PEB/PESB
Operating Temperature Up to 150° F (66° C)
Dimensions

6 1/2" x 4" x 4"
(16,5 cm) x (10,2 cm) x (10,2 cm)

Electrical Specifications

24 VAC 50/60 Hz (cycles per second) solenoid
Inrush current: 0.41A (9.9VA)
Holding current: 0.14A (3.43VA)
Coil resistance: 30-39 Ohms

Flow Range

Flow without PRS-D option: 0.25 to 200 GPM (0,06 to 45 m3/h; 0,02 to 12,60 l/s)

Flow with PRS-D option: 5 to 200 GPM (1,14 to 45 m3/h; 0,32 to 12,60 l/s)

Operating Pressure 20 to 200 psi (1,4 to 13,8 bar)
Frequently Bought Together
© 2021 Rain Bird Corporation. All Rights Reserved.